MARITIME LIFTING EQUIPMENT

CRANES, WINCHES, POWERPACKS, LIMPET DAMS & MORE

Originally commissioned by a well known International Construction company for use on a large scale International airport extension project in a maritime environment in London, this impressive gantry crane system was designed to manoeuvre construction materials from a land based delivery point to a wet construction area.

On completion of the project the fully functioning components were inspected by our technical engineering team and acquired for onward sale. This is a unique opportunity to acquire this assembly for immediate deployment anywhere in the world. Used on one project, the equipment is available for inspection but is fully functioning and has no significant signs of wear.

CONTACT US

SALES INVENTORY

Capstan Winches

Made by the impressive TMS team in the Netherlands and powered by Tech Sprint Powerpack, also available in this sale, this is an opportunity to acquire a set of world-class heavy duty winches that can be adapted for use in any environment, any project anywhere in the world.


Limpet Dams

We have 5 fully functional limpet dams available, originally commissioned for the construction of an airport extension project on the River Thames. TMS are the world’s leading name in Limpet Dam manufacturing and all original paperwork can be provided to show the design specification and certification of these limpet dams prior to sale. 

Mooring Pontoons

Designed for us with the TMS mechanical lifting equipment, piling gates and limpet dams, these large industrial mooring pontoons were originally commissioned for the construction of an airport extension project on the River Thames. 



Power Unit #1

These 22kW Hydraulic Power Units have a 400 litre tank capacity and are designed to give power to four hydraulic components like mooring winches or spud cylinders, which can be operated independently. 

The electric motor drives a fixed displacement hydraulic pump which is connected to the control valve. The system is an open loop system and the used oil from the driven machine is returning through the filter into the tank. 

Power Unit #2

Two hydraulic powerpacks, also supplied by TMS in the Netherlands. This 4kW powerpack was acquired as part of the decommissioning of a large scale airport construction project in London. 

These HPU’s are designed to give power to four hydraulic components like mooring winches or spud cylinders, which can be operated independently. 


Mooring Ropes

Heavy duty mooring ropes, never used, originally commissioned for use on the large scale airport construction project in London. The ropes are available for private treaty as a job lot or as individual pieces.

We have 10 of these 50mm diameter, floating ropes designed for use in maritime conditions. Designed to withstand a 5T payload.



Piling Gates

These deep water Piling Gates were originally commissioned for the construction of an airport extension project on the River Thames. Designed for use in inland maritime environments we have 12 gates in total ready for sale individually or as a job-lot. The gates are designed with fully operational Valve Bank Hydraulics and are ready for immediate deployment. 

Can be paired with the Tech Sprint Powerpack also available in this sale.

Gantry Crane

1 piece 42 ton overhead gantry crane plus spreader, spanning 15m with a special low headroom design. Electric frequency driven travelling for crane and trolley, hydraulic driven lifting system with cylinder and 2 wire rope hydraulic rotator function inside the spreader. There is an additional hydraulic balancing system inside spreader for compensation, out of level of load in case the centre of gravity of loads is not in centre of lifting points.
The gantry crane system is electrical and hydraulically operated. 

Spreader Beam

A unique component of the overall gantry crane system, the spreader beam has a combined 46 ton lifting capacity. When used with an installed gantry system this provides the user access to a lift, move and rotate loads. Designed for an external maritime environment (the River Thames, London) this equipment can be easily adapted for less hostile environments and internal use also.

The spreader beam is fixed to the trolley by the wire rope. On top of the spreader beam, a hydraulic slewing drive is fitted. With this slewing drive the spreader beam can be rotated unlimited 360°. The lifting points, read link brackets, can be easily shifted along the castellated plates at each side of the spreader beam. The link brackets are an integral part of the spreader beam and excluded from the lifted load. The rigging is to be connected to the link brackets.

This AMAZING opportunity to secure some premium heavy lifting equipment including winches, powerpacks, limpet dams and pontoons is not to be missed. Equipment like this doesn't come around all the time and can be secured at a fraction of the original cost.

WATCH the video above and get in touch to find out more and to arrange a private viewing - this stock has to go and will be sold soon!
CONTACT JAMES TO FIND OUT MORE

SALES INFORMATION

We have compiled a summary description of each component in this downloadable PDF sales document - but there is only so much information we can publish openly. We have all the technical sales documentation and user manuals available for interested buyers - download the PDF now or get in touch for more detailed information.
DOWNLOAD

If you're interested in this unique set of lifting equipment, get in touch with our technical sales team when they are available for viewings at site or via video call.

CONTACT US